Home / Service / Workshop / Tools and materials

Tools and Materials

by andi und Ioannis Nezis
  • Materials
  • Tools

You will find the following list of materials in the workshop. There is certainly more, but this should be the most important so far.

You will find most of the materials in the large rolling magazine or in the drawers in the large cupboard. All of this is consumable material and can be used free of charge or for a small donation. If you need larger quantities of anything, please let us know so that we can reorder in time. If you are not sure what counts as consumables, please ask :)

  • Arduino sensor modules
  • CAT5 patch cable + plug (sold by the meter)
  • CAT7 installation cable
  • Cable ties
  • Capacitors (THT)
  • Crocodile clips
  • Metric screws M3-M8
  • PCB connector Molex
  • PLA Filament
  • PCB hole pattern
  • PCB strip grid
  • Plastic housing
  • Resistors (THT) E12 series
  • Shrink tubing
  • Stranded wire
  • various logic gates
  • various OPAmps
  • various transistors (biploar/MOSFET)

Tip

If you have ideas for further purchases and these are potentially useful for other people, please contact us by e-mail with your idea.

We have the following SMD components on reels and will issue them on request:

  • 1 kOhm, 4.7 kOhm, 10 kOhm 0805 SMD resistors
  • 100 nF capacitors

You will find the following tools in our workshop

  • Drill bits
  • Crimping pliers
  • Dremel
  • 3D printer
  • Desoldering station
  • Frequency generator
  • External and internal thread cutter
  • Hot glue gun
  • Hot air gun
  • Hot air station
  • iFixit Pro Tech toolkit
  • Cable reel
  • compressor
  • Laboratory power supplies
  • Logic analyzer
  • Soldering station with interchangeable soldering tips
  • Multimeter
  • oscilloscope
  • Programmable load
  • calliper gauge
  • Standard hand tools (hammer, saw, spirit level, …)
  • drill press

To lend on request:

  • Raspberry Pi 4
Last modified on March 21, 2025 by Andreas Philipp
Edit this page in GitLab.